Learning from your mistakes is good. But it’s better to get it right the first time.
That is what this write-up is for.
You don’t have to go through the years of trial and error we did. This article explains everything you need to know about using mod podge on glass.
Keep in mind that using mod podge for art and crafts is a creative venture. So, there isn’t any single process to do it all. We have mentioned a standard process of using mod podge on glass here. But this can vary with the design and materials you are using.
That being said, we have also tried to mention as many variations as we could, but the possibilities are endless. Just hold your enthusiasm and be creative.
What is Mod Podge?
There are a lot of people out there who don’t have any idea about mod podge. Even those with a basic idea don’t seem to have an accurate understanding of mod podge, what it does, if it is just glue or something more. Mod podge is the short form of modern decoupage. So, it is a decoupage medium used for art and craft.
Now, what is a decoupage medium?
A decoupage medium is a non-toxic and water-based material used as a glue, sealer, and finish.
You can use them on paper, glass, ceramics, metal, plastic, canvas, terra cotta, cardboard, and even tissue paper. But we are gonna talk about the application of mod podge on glass today.
Which Mod Podge to Use on Glass
If you don’t already know, there are a lot of variations of mod podge. Let me give you a list of them-
- Dishwasher safe mod podge
- Brush stroke mod podge
- Mod podge extreme glitter
- Super gloss
- Fabric mod podge
- Furniture mod podge
- Glow in the dark mod podge
- Sparkle mod podge
- Ultra matte chalk
- Antique matte
- Mod podge hard coat
- Mod podge matte
- Mod podge outdoor
- Mod podge puzzle saver
- Mod podge satin
- Mod podge ultra
- Mod podge dimensional magic
- Mod podge resin
- Mod podge stiffy
Some of these might be familiar to you, and some others might not be that much.
But you don’t see a glass podge there, do you?
That is because most of them can be used on glass, with the exception of mod podges specified for paper and fabric.
However, Dishwasher mod podges that come in the blue bottle are the best for glass, especially if you are gonna use the glass fixture actively. Most other decoupages will dissolve in water.
Outdoor mod podge is also another option. Gloss, matte, and satin are the next three best candidates for glass. The ultra-gloss is also highly resistant to water.
How to Use Mod Podge on Glass | Step-By-Step Guide
The process seems very intuitive. And it is, for the most part. But following a few small details completely changes the looks and endurance of your craft. Here is a process you should follow-
Step 1: Cleaning the glass
First up, you have to clean your glassware. Remove any stickers on it with a sharp edge razor. Then clean it with warm, soapy water. Make sure there isn’t anything stuck to it.
Step 2: Drying them properly and applying alcohol
This is a continuation of the cleaning process. But I am separating it because it is crucial to apply mod podge on any glassware successfully. You have to let it dry for at least an hour.
You have to use some rubbing alcohol on the glass. Take some paper towel or cotton and rub the alcohol with it. Remove all the oil, grease, and other sticky substances and make your glass squeaky clean.
Step 3: Prepare the items you want to attach on your glass
Paper strip, fabric, napkins, tissue paper, or photo paper, you can stick and seal almost anything with mod podge. There is a list of things you can use with glass and mod podge after this section.
In this step, you have to cut them according to the size you want to use. You can color them, glitter them, or do anything you want.
Step 4: Apply mod podge on the glass
I generally use the dishwasher safe mod podge as that comes in a blue bottle.
Before applying the podge, you need to decide whether you want to color the glass. If you want, you need to do it before applying the decoupage. You can also add food coloring to the mod podge for lightly staining the glass.
Now, you need to apply the first coat of decoupage to the glass. Put a thin layer on the glass with a soft bristle brush. Apply the mod podge very close to the area where you are gonna stick your decorations.
Mark the borders with a tape if they are well defined. If the layer is too thick or gone out too far, you might have to sand it away. A thick layer might be required if you are using other materials like fabric.
Step 5: Stick the items
Take your motifs, embellishments, pictures, or whatever you have prepared and put a light coat on the side that is going to stick to the glass. Don’t worry if you have to coat the face of the motif, as mod podge will dry clear. Finally, attach it to the glass where you have the layer of mod podge.
Step 6: Press the motif to smoothen it out
Get a saran wrap or any plastic wrap and put it down on your motifs. Then press it with your finger to smoothen it on the glass. It will get all the bubbles and extra podge out. This makes the project wrinkle free.
When pulling out the wrap, be very careful so that the motif doesn’t come off. If it does, just gently put the whole thing back in place and try again.
Now, let it rest like this for 24 hours or more. It must be dry to touch.
Step 7: Sealing the project or top coating
As we have already said before, mod podge can also be used as a sealer and finish. After the resting period, you need to seal your project.
Give a thin topcoat on your item and other necessary areas which need to be sealed. Again, use a soft bristle brush for that. Then let it rest for 2-3 hours. After that, you can apply another thin layer. Do 2-3 top coats like this to finish the job.
You can also use a dedicated sealant for this end part.
Let it rest for a month or so. This will properly settle the design in place.
Tips and Tricks for Making Your Mod Podge Application Better on Glass
These tips and tricks are coming from our years of experience. Follow them if you have the chance, and you should get everything right the first time.
- Be patient. That’s the most valuable tip any professional can give you.
- If your paper is too stiff, try to moisturize the back of it by brushing a very thin layer of water with a soft brush.
- You can lightly sand the glass surface for a better result.
- If your photo paper is not sticking to the glass, that is because photo paper generally doesn’t soak the mod podge very well. You can print your image on another paper and use that instead. Use an inkjet printer and also try to spray seal on both sides of the photo.
- Use a sponge pouncer instead of a brush for a textured look. You can also use it for smoother coats without any ridges.
- If you are working with a glass jar, it is better to use one that you can put your hands inside.
- You can use a rice bag to make your project stable when working with it, especially if it is something curvy like a jar.
Listen to the experts and save your time!
Alternative Materials That You Can Use on Glass
Here is a small list of things that you can use on glass with mod podge to spark your imagination-
- Tissue paper
- Washi tape
- Wrapping paper
- Printed photos
- Scrapbook paper
- Epsom salt
Use them creatively to make different patterns and pictures on your glassware.
Frequently Asked Questions
1. How long does it take mod podge to go bad?
According to experts, it takes about two years unopened and six months opened to go bad. However, my personal experience say that it stays good way longer than that if you keep it in ideal conditions. Mined stayed perfectly good for years in my craft room.
2. Can mod podge be used as glue?
Yes, it can. But it is way more than that.
3. Can the mod podge be applied on a window?
Yes, but you have to choose the correct formula. The outdoor formula might be the best one for this task.
4. Why my mod podge was white after drying?
A: This happens when you apply an unnecessarily thick coat on glass.
5. Is mod podge a varnish?
It can be called a varnish.
There isn’t much that can go wrong with using mod podge on glass. There is all you need to know about how to use mod podge on glass perfectly with wonderful ideas, and the cost is also minimum.
It is great for kids and seniors alike. You can get all the materials with a few clicks of a button, and no special skills are required.
So, what are you waiting for!