Were you ever been impressed by those delicate etchings on glass? If so, then this article is just for you!
Glass engravings are very pleasing to look at. When you walk into the store and spot a sparkling mug or a champagne glass engraved with floral patterns, you might wish to have it showcased in your dining room.
But the price tag comes as a barrier to your wallet. The same case goes when you want to order personalized glass engravings for your loved ones.
While you may think that engraving on glass is a difficult process, trust us, it’s easier than you think, especially when you have Dremel!
Dremel is an American brand known for its rotary tools designed for different purposes, including glass engraving. With such tools, you can make your own engravings in the comfort of your home!
If you’re wondering how to engrave glass with a Dremel, keep reading!
Types Of Accessories For Engraving
Before we go further, let’s familiarize ourselves with the three main types of tools needed for engraving in general.
1. High Speed Cutters
High speed cutters are accessories used to remove a part of soft materials, like leather, wood, brass, aluminum, and copper. Such cutters are mostly used for engraving, hollowing, shaping, and grooving.
2. Engraving Cutters
Engraving cutters are used for detail work. The materials that are suited to this type of cutter include plastic, wood, as well as soft metals like brass, copper, and aluminum.
3. Diamond Wheel Points
Diamond wheel points are specially designed for fine-detail work on harder materials, such as glass, jade, ceramic, and semi-precious stones. The tips of these tools are covered with diamond, which makes them suitable for carving, cutting, engraving, and touch-ups.
How To Engrave Glass With A Dremel
Step 1: Getting Started
For this project, you’ll need a standard rotary tool by Dremel. You can either choose the one that comes with a shaft extension or use it as is. If you want to perform more detailed work on glass, then it is a good idea to use a shaft extension.
Before starting the work, make sure to put on goggles, gloves, and a face mask. Engraving involves plenty of fine glass dust particles. Inhalation of such particles in large amounts can cause serious injury in the lungs. Once the sharp particles enter the lungs, they cut the lung tissues and cause bleeding inside.
Make sure the glass item you choose for etching is clean and dry. The presence of dirt and grease can prevent you from seeing clearly, hence disrupt the engraving process.
Step 2: Do Some Practices
Since it’s your first time working with a Dremel, it is a good idea to see how the tool works. Take an old mug or a glass bottle that won’t sadden you in case the engraved design goes wrong.
Stick a few poster tacks on your work area and place the glass item on them so that it stays in place. Set the Dremel at medium speed and do some freehand designs on the glass item.
Because of the dust particles formed in the process, you might find it difficult to see what you’re doing. In that case, keep a clean cloth and a bowl of water near you so that you can wipe off the dust particles.
Although the design might seem to be disappearing, it’s still there and will be clearly visible once the surface is dry.
Note: Don’t apply too much pressure while etching. The tool will work fine at light pressure.
Step 3: Trace A Design
Once you are comfortable with the tool, it’s time to go for a detailed design. Choose the design you want to be etched on glass and print it. Cut it out of the paper and tape it to the inside of the glass item. This allows for easy tracing.
Depending on the fineness of the details, choose the ball sizes accordingly.
Step 4: Trace An Outline
If you choose to work on a glass item inside of which you can’t place your printed design, follow this step.
Print your desired design. Instead of cutting it out, cover the design with a wide painter’s tape. Use an Exacto knife to cut along the outlines of the design to leave a silhouette. Peel off the tape carefully and place the design on the glass item.
Note: For the inside details of the design, you’ll need to freehand them.
Once you step into the world of glass etching, it can turn into a hobby or a profession. Instead of emptying your wallet for engraved glass items, you can invest in Dremel tools and enjoy making personalized glass items as much as you want!
As long as you follow the safety precautions and know the ways to handle the tools carefully, you’ll be able to do this kind of work safely.
Now that you’ve learned how to engrave glass with a Dremel, why not showcase your very first engraved item in the dining room?